ACI Adhesive Anchor Installer / Inspector Program

Back to Calendar

ACI Adhesive Anchor Installer / Inspector Program

Date: March 19-20, 2019
Time:
  • Day 1: 8:00 am - 5:00 pm
  • Day 2: 8:00 am - 5:00 pm
Location: ARM of Minnesota / BASF Offices
Please See Registration Link Below
Description

The Aggregate & Ready Mix Association of Minnesota (ARM) will be offering an ACI Adhesive Anchor Installer / Inspector Certification Program on March 19-20 in Eagan. If you are interested in attending the program, please click HERE for additional information. Instructors will be Dr. Kevin MacDonald, PE and Dr. Tumer Akakin, PE.

An Adhesive Anchor Installer is an individual who has demonstrated the ability to read, comprehend, and execute instructions to properly install adhesive anchors in concrete. The Adhesive Anchor Installer must also demonstrate possession of the knowledge to properly assess ambient conditions, concrete condition, materials, equipment, and tools for installing adhesive anchors and determine when it is appropriate to proceed with installation of an adhesive anchor or when additional guidance from a supervisor/foreman/project engineer is needed. See additional details.

A certified Adhesive Anchor Installation Inspector is an individual who has demonstrated the knowledge required to properly inspect the installation of adhesive anchors in concrete. The Inspector must understand the responsibilities and qualification requirements of the Installer, inspection requirements as cited in the documents governing the construction of the project, and the process governing the qualification of anchor systems. See additional details.

Instructors: Dr. Kevin MacDonald, P.E. & Dr. Tumer Akakin, P.E